Closed ATM View - 10528
Room Floor Combat Range Refurbishment and Maintenance
Room Floor Combat Range Refurbishment and Maintenance at Campbell Barracks, WA.
The Special Air Services Regiment (SASR) indoor training range will be upgraded to meet ballistic requirements for firing different size calibre weapons.
The Scope of works includes - install two layer full height stationary perimeter lamells, upgrade main sliding door to lamells sliding doors, fire door - lamell sliding doors, full floor slab replacement and roof and gutter repairs.
The Tender Documents and Contract are loaded on AusTender (under ‘Go to ATM documents’).
The complete Scope of Works has not been uploaded. To obtain the complete set of documents, Tenderers are to follow the following process:
1.Click on Go to ATM Documents
2.Download the tender documents
3.Go to Confidentiality Agreement
4.Print and sign the Confidentiality Agreement
5.Return the signed copy by email, as a scanned PDF file, to the Contact Officer / PDS Contractor noted below.
Tenderers are to note that without the Confidentiality Agreement being returned to the Contact Officer / PDS Contractor, the complete Scope of Works are unable to be released.
An industry briefing will be conducted at the following location(s) at the specified dates and times:
Campbell Barracks
Date: 21/01/2016
TIME: 9:30 AM to 12:30 PM
Details of attendees (including names (first and last), mobile phone and driver licence numbers) are to be emailed to:
cw.pds@aurecongroup.com no later than 5:00 PM Tuesday, 19 January 2015. Applications for attendance after this time may not be accepted.
Note that all attendees must possess either a current Defence access pass, or a current Australian drivers licence or passport to gain access to the Base.
A maximum of two (2) persons per company may be in attendance and tenderers should allow a minimum of 4 hours for the briefing.
Tenderers are to make their own travel arrangements to the above industry briefing location(s) and return to their original destinations. Parking is available at the Base.
Tenderers are to meet at the entrance gate at the above industry briefing location(s). Tenderers are to arrive 15 minutes prior to the briefing for site induction, wear appropriate PPE including high visibility vests, foot wear, and weather protection.
Any questions relating to this tender are to be forwarded via email to the Contact Officer / PDS Contractor nominated below.
The cut-off date for questions pertaining to this tender is seven (7) days before the tender close date.
The Tenderer must at the time of submitting its Tender satisfy each condition for participation as specified in the Tender Documents including:
• The Tenderer must complete and return the Disclaimer and Confidentiality Agreement.
• The Contractor is required to provide sufficient appropriately authorised personnel who hold a current Baseline security clearance. Where this is not possible, the Contactor shall provide sufficient suitable cleared and authorised escort/s as required. The Commonwealth will not provide escorts for uncleared Contractor personnel.
• The Tenderer must comply with the Building Code 2013 at the time of submitting its registration of interest or if no registration of interest was submitted, at the time of submitting it’s tender.
• The Tenderer must not be precluded from tendering for Australian Government funded work or specifically excluded from participating in this tender process.
• Each additional condition for participation stated in the Tender Particulars (if any).
Within 26 WEEKS of contract execution