Closed ATM View - 10089
Defence Science Technology Group Edinburgh - Gun Tunnel Remediation Works
Show close time for other time zones
This project involves the upgrade of the Gun Tunnel including stop butt, lighting, door and insulation replacement and mechanical ventilation improvement works at Building 308l at DSTG Edinburgh.
The Tender Documents, Contract and are loaded on AusTender (under ‘Go to ATM documents’).
The Design Brief and Specification has not been attached. To obtain the complete set of documents, Tenderers are to follow the following process:
1. Click on Go to ATM Documents.
2. Download the Tender Documents.
3. Go to the Confidentiality Agreement.
4. Print and sign the Confidentiality Agreement.
5. Return the signed copy to the Contact Officer/PDS Contractor noted below via email, with the Agreement scanned to PDF file.
Tenderers are to note that without the Disclaimer and Confidentiality Agreement being returned to the Contact Officer/PDS Contractor, the complete set of documents are unable to be released.
Any questions relating to this package of works are to be forwarded via email to the Contact Officer/PDS Contractor below.
The cut-off date for questions is seven (7) days before the tender close date.
An industry briefing will occur in relation to the Works. Refer to Part 2, Tender Particulars of the Tender Conditions.
The Tenderer must at the time of submitting its Tender satisfy each condition for participation as follows:
• The Tenderer must complete and return the Disclaimer and Confidentiality Agreement
• The Tenderer must comply with the Building Code 2016 at the time of submitting its registration of interest or if no registration of interest was submitted, at the time of submitting its tender.
• The Tenderer must not be precluded from tendering for Australian Government funded work or specifically excluded from participating in this tender process
• Each additional condition for participation stated in the Tender Particulars (if any)
To be determined following selection of successful tenderer; work to be completed prior to 21 May 2018.