Closed ATM View - ANMM-1912P
RFQ – Supply & Installation of Crash Rated Bollards at the ANMM
Show close time for other time zones
The bollards are to be installed in one area only.
a) Supply and Install Crash rated Shallow Bollards (200mm deep) to withstand a 7.5 tonne truck travelling at 64km/hr at 90 degrees. Stainless steel cover and 900mm-950mm above ground level. (Around 15 off)
b) Supply and Install Moveable Hydraulic Bollards (Around 350mm diameter) and the power unit with a bank of 5 to cover an 8m roadway area. Blocking height must be 1000mm-1100mm. Bollards remain in raised position in the event of a power failure. Bollards must be able to be lowered manually in the event of a power failure. Three phase power which is close by will supply the unit. Maximum bollard edge spacing is 1500mm. Designed to withstand a 7.5 tonne vehicle traveling at 64km at 90 degrees.
• $20M in Public Liability Insurance
• Contract Works Insurance – Contract amount plus 20%
• Workers Compensation Insurance (as required by law)
• NSW 2C Security licence - this is a new requirement by the NSW Security Licencing Directorate.
Engage Contractor : Mid July
Site Works : August to September after items have been procured.