Closed ATM View - ASA RFT SR247319452
Melbourne ATSC Ground Floor Refurbishment Works
Show close time for other time zones
The Works are identified and specified by reference to the GHD design documents in the Request documents.
The major elements of the fit out include:
i. Construction of data processing equipment rooms
ii. Construction of Console rooms with flooded floor plenum
iii. Construct Training rooms
iv. Construct a video conference room
v. Construct meeting rooms
vi. Construct open plan office workspace
vii. Construct Testing workstations area
viii. Demolition works as shows on the drawings
ix. Construct partitioning to suit Zone 2 and Zone 3 security areas, including supply and installation of new hardware and access controls, including the addition of structural silicon to the internal face of existing glazing
i. Supply and installation of exposed services and cable trays
ii. Decommission, demolition, disposal off site of the redundant electrical and communications services as identified
iii. The supply, installation, testing, commissioning, maintenance and warranty of the electrical and communications services as identified
i. Decommission, demolition, disposal off site of the redundant mechanical services as identified
ii. The supply, installation, testing, commissioning, maintenance and warranty of the mechanical services as identified
i. Carry out hydraulic calculation to determine the maximum flow and pressure requirement of the sprinkler system within the Project Refurbishment Area.
ii. Allow to upgrade fire sprinkler pumps and reconnect the existing pipes to the upgraded fire sprinkler pumps. The pump duty shall be based on the above hydraulic calculation.
iii. Reroute the existing supply main to the roof and reconnect to the existing sprinkler main.
iv. Replace the EX air-compressor with a new one for the pre-action sprinkler system.
v. Alter existing sprinkler system as shown on the drawings.
vi. Provide metal guard to ceiling space and underfloor space sprinklers in JSSF Racks, JSSF & SPS Consoles and ASTS room.
vii. New sprinklers and pipes in Gas Bottle Storage room.
viii. Supply and install new monitored isolating valves to enable zone isolation.
ix. Supply and install drain valve to underfloor sprinkler pipes.
The fit out works exclude:
a) Provision and installation of new data processing equipment
b) Provision and installation of the consoles, workstations and furniture items
c) Communications cabling between the equipment rooms and the consoles and the testing workstations.
(a) The Tenderer and any subcontractors proposed in the Tenderer’s Tender must not be named as not complying with the Workplace Gender Equality Act 2012 (Cth).
(b) The Tenderer and any subcontractors in the Tenderer’s Tender must not be named on the Consolidated List, being the list of persons and entities who are subject to targeted financial sanctions or travel bans under Australian sanction laws, as maintained by the Department of Foreign Affairs and Trade at http://dfat.gov.au/international-relations/security/sanctions/Pages/consolidated-list.aspx.
(c) If the Tenderers response indicates that the value of the works is $4 million or more (inclusive GST) then it is a mandatory requirement that the Tenderers are accredited under the Australian Government Building and Construction WHS Scheme and/or is in the process of obtaining such accreditation and will achieve accreditation by the indicative contract commencement date.
(d) Tenderer compliance with Australian Government Black Economy Procurement Connected Policy.
Please refer to Request document.